FUTURIAThe New Name for the University of Now and the Future Official approved logo of Digital Al-Jazari (DJAIRI)Parent institutionDigital Al-Jazari (DJAIRI)

FUTURIA · Original language: Arabic · Read the original

Rainwater Harvesting: Principles, Calculation and Safety

Rainwater harvesting means collecting the runoff produced by rain and storing or directing it for use, instead of letting it be lost to evaporation or flow away to places where it cannot be used. Communities in the Arab region have practised it for thousands of years through wells, cisterns, small dams and agricultural terraces. Today the practice is returning to the fore as part of adapting to water scarcity and climate change.

Types of harvesting systems

The scientific literature, including the FAO manual prepared by Critchley and Siegert, classifies harvesting systems by the size of the catchment and the way the water is used:

  • Rooftop harvesting: collecting rain from building roofs and storing it in tanks, usually for household use.
  • Micro-catchments: basins and furrows near plants that collect runoff from a small adjacent area.
  • Macro-catchments: collecting runoff from slopes or valleys and directing it to farmland or reservoirs.

The book by Oweis, Prinz and Hachum, published with the International Center for Agricultural Research in the Dry Areas (ICARDA), covers the use of these systems in dryland agriculture.

How much water can be collected?

The basic equation is simple:

Volume of water (cubic metres) = rainfall (millimetres) × surface area (square metres) × runoff coefficient ÷ 1,000

The runoff coefficient is the share of rainfall that actually becomes runoff. It varies with the type of surface: it is high for smooth, non-porous surfaces and low for soil and porous surfaces. Its value should be taken from a technical reference or a local measurement, not assumed.

An illustrative example: a roof of 100 square metres in an area with average annual rainfall of 250 millimetres, with an assumed runoff coefficient of 0.8:

100 × 250 × 0.8 ÷ 1,000 = 20 cubic metres a year, or about 20,000 litres.

This is a theoretical figure: rain falls in short periods, the tank may overflow, and the first rain may be lost in washing the roof.

Water quality and safety

Water collected from roofs is not automatically safe to drink. It may carry dust, bird droppings and contaminants from roofing materials. Therefore:

  • The first flush of rain is diverted away with a first-flush device before it enters the tank.
  • The tank is tightly covered to keep out light and insects and to prevent mosquitoes from breeding.
  • The water is used for irrigation and cleaning unless it is treated and tested according to recognised health standards, such as the World Health Organization's guidelines for drinking-water quality.
  • Children's safety around tanks and pits is ensured, and no digging or construction is carried out without a specialist and the necessary permits.

When is harvesting worthwhile?

Feasibility depends on the amount and distribution of rainfall, the surface area, water demand and the cost of storage. In very dry areas, harvesting may be a supplement rather than a main source. It is therefore wise to start with a simple calculation and compare alternatives before any investment.

Summary

Rainwater harvesting is an old solution renewed, based on realistic calculation and attention to quality and safety. Any learner can start by calculating how much rain could be collected from their own roof using published rainfall data, before moving on to any practical application under a specialist's supervision.

References

  • Critchley, W., & Siegert, K. (1991). Water Harvesting: A Manual for the Design and Construction of Water Harvesting Schemes for Plant Production. Rome: FAO.
  • Oweis, T. Y., Prinz, D., & Hachum, A. Y. (2012). Rainwater Harvesting for Agriculture in the Dry Areas. Leiden: CRC Press.
  • Gould, J., & Nissen-Petersen, E. (1999). Rainwater Catchment Systems for Domestic Supply: Design, Construction and Implementation. London: Intermediate Technology Publications.
  • World Health Organization (2022). Guidelines for Drinking-water Quality: Fourth Edition Incorporating the First and Second Addenda. Geneva: WHO.

Related reading